High Flow Nasal Cannula (HFNC) Oxygen Therapy Device, Non Invasive Ventilator, high flow rates with heated humidification, for adult and pediatric mode, AC powered, with accessories

General description

Non Invasive Ventilator, high flow rates with heated humidification, for adult and paediatric mode, AC powered, with accessories

Important Information

Oxygen concentrators are not suitable to be used as an oxygen source to other medical equipment providing respiratory support, such as ventilators, CPAP devices, High Flow Nasal Cannula, etc.

The technical specifications listed below are the minimal requirement that the HFNC devices can perform and fulfill according to the WHO requirements. The detailed technical specifications and packing contents can be slightly different across models. The specific product model and information will be sent for your approval prior to next steps.

Technical Specifications

The humidity compensation system

The temperature the mixed gas of air and oxygen is warmed up to 37°C

FiO2: 21 to 100 %.

Flow up to 60L/min

Alarms, related to gas delivered; Visual and audible for: High/Low FiO2 and System leakage or blockage

Alarms, related to equipment operation: Visual, audible and clearly indicating the problem for: Lack of water; System failure; Power failure

Operating Voltage: 100-240 V ~, 50/60 Hz

Equipment must be connected to a continuous source of power. Note that power plugs may vary across countries

Quality Standards

ISO 13485

Directive 93/42/EEC

Items minimally supplied with

HFNC Main Unit – 1 piece

Oxygen cannula  – 1 piece

Water Chamber – 1 piece

Heated breathing circuit – 1 piece

High pressure oxygen tube – 1 piece

Flow meter – 1 piece

User Manual  – 1 piece

Power cord  – 1 piece

Quality certificate  – 1 piece

Installation requirements:

The User Manual supplied with the device details all installation which can be undertaken by users.

User training requirements

The User Manual supplied with the device details all operation procedures for user.

Technical training requirements

The User Manual supplied with the device details all maintenance and troubleshooting procedures which can be undertaken by users.

Note: Contact Iplussolutions if additional installation and training requirements are required beyond user manual

Warranty Period

2 years